Shot some starting fluid down the throttle body with the accelerator depressed to the floor. Got a backfire and a little flame. I am guessing I still have a timing issue. I noticed in some threads and this web site
http://autorepair.about.com/library/a/1a/bl340a.htm that there are two marks on the crankshaft balancer. I only have one mark (groove). It currently aligns with the tab at the top (under the water pump) at TDC on the compression stroke and the rotor points to the number 8 mark on the distributer housing. This mark lines up with the number one contact on the distributer cap. I have a compression gauge hose that I screw into the number one cylinder so I can easily be sure I have pressure to ensure I am on the compression stroke. Wondering why I only have the one mark on the crankshaft balancer? Am I missing something?