Thanks a lot Stratos!
The matter is getting harder .. but I knew it .. and whoever takes the win .. but it is also required so much patience, I assure you .. For the work I did in those days at least it is so ..
I dedicated my time to the heads (just the first to tell the truth ..).
I started by removing the vertical fins that I showed a few days ago because a millimeter in thickness between one and the other was too much, not a lot, but excessive. I then folded up to a thickness of 0.7 and 0.5 by fins and the whole is more commensurate and in appropriate scale.
And then the first thing you notice in a knuckle can't not be the rocker (the head itself), so.. project at hand, I designed the PC mirror masks to get the parts from solid.
I glued 10 rectangles of plasticard from 1 mm to form a solid on whose faces I glued the templates ..
... The result is a pile of rubble and a brand new rocker .. Lacking only the bolts front and rear cam cover.
The cam cover in particular were starting to play some brass tubes that hold the structure intenramente and, using the plate of a tube of glue (do not know .. maybe it's aluminum ..), I shaped it directly on the cylinder creating a couple of carter, then glued and finished ..
I know a lot of work .. but it is a unique satisfaction I guarantee ..
Now that I've done a little 'practice on the front cylinder I will dedicate myself more to the rear ..
see you soon!
