Quote:
Originally Posted by stanwood
I replaced my A/C compressor because is was leaking around the pulley seal. When I replaced the A/C compressor, I also replaced the in-line filter, and accumulator.
The issue is that after the A/C runs for say 10 minutes or so the compressor clutch slips momentarily then spins fine for a few. Seems to get worse the longer the compressor is running.
The low-side pressure is around 30-40 psi. and mostly steady until the clutch slips then it starts heading up to around 50 psi or so.
Any thoughts are appreciated.
|
What is the high side pressure?
If it goes over 350 it could cause cutch to slip or belt to slip.