|
Re: ABS Light...
So, the ABS light was not on before messing with the modules?
Unfortunately, the year of your car is a problem........by that I mean, it was a transition year between OBD I and OBD II......you need to read ECM and ABS codes......most of the code readers and scan tools out there, can't seem to read these codes, for this year.....it takes either expensive equiptment or GM scanners to do this.....
If the ABS light is on, a code is set, and needs to be read.......
As for the A/C system a code could be set in the ECM, which disables the A/C system.......this could be a low charge code......if you are low on freon and this system uses a pressure sensor, then if pressure is below 45 psi, then the compressor won't engage and the cooling fan won't run because there is no compressor running......
|