Quote:
Originally Posted by SeanyG
Hi there and welcome to the Forum!!!
Thanks for your kind comments and glad you liked the Lotus. For the fasteners you can do it two ways,
1: use some very fine wire (the metal wire inside plastic food bag twist ties is good) wrap around the wires to be secured, then drill a small hole where the fastener is going to sit and push the loose ends into the hole (hope tat makes sense.
2: if you can't get access to the under side of the panel you want to attach the wires to, then you can just use a very thin strip of electricians tape or for a chrome fastener some chrome decal, wrap it around the wires to the ends are hidde underneath and glue it to the surface.
I use both methods depending on where I want the cables to be fastened down to. Hope that helps and thanks for following, I will have a little more progress this afternoon.
Sean  |
Thanks for your reply! Will give it a try this evening. Looking forward to the progress on the Ferrari