[quickcurrent]

Thanks again gmtech1, I solved the problem with the bell coming on and the red brake light coming on.

When I applied the parking brake, the light went off. When I released it it cane back on!

So I went down looking for the switch you mentioned and didn't find the switch but found a wire with a blue sheath and a copper colored terminal with an L end that was dangling loose. My wife must have moved that connector over to the left so it touched metal in the area of the parking brake cable and shorted something causing my problem!

The question now is what is that blue sheathed wire doing there? Should it be connected to something or is it one of those wires for future/other feature not included in my Uplander, meaning that I should just put some electrical tape on it and tuck it out of the way? If you need it, I took a photo of it.