Quote:
Originally Posted by VA3EPR
ok thank you for the info on the knock sensor. i'll check cyl, 6 and see if might be spark plug or wire. as for testing on another vehicle ...no i have not. i may go to my buddies and try it on his tommorow. as for the fuel gauge i only replaced the pump. all wires are hooked up as they were when i took the old one out, i followed the manufactures instructions and disconected the neg before attemping to take it out. replaced neg when i was finished. and still no go...? I have a digital cluster. i am now ok on these checks, for the scanner oh,m,f,cc. they all check and stay solid, the blinking ones are c,o and e they stay blinking and wont go past these ones for scan.
|
I take it the fuel gauge did not work before you replaced the fuel pump.
Try
www.autozone.com for a wiring diagram, you will need to register to get the repair manual but it is also free. I looked at a different source for the diagrams. I do not think the fuel gauge or the fuel pump circuit has anything to do with the data link. I will look further tommorrow.
You could switch plugs on clyinder 5 and six to see if miss follows the plug.
Same with plug wire. Also listen to injector with a screwdriver to ear and listen for a clicking sound.