Quote:
Originally Posted by tempfixit
Accoording to the wiriring diagram I looked at Fuse # 29 in the istrument panel (10amp) and the engine cont fuse in the enine compartment fuse/relay panel (10 amp) go to the data link.
I assume you tried the scanner on another vehicle ?
In case you are not aware that P0325 is Knock sensor code and is set by the code P0306 which is for a miss in clyinder #6. DO NOT REPLACE KNOCK SENSOR as it very seldom fails.
Whiuch instrument cluster do you have, analog or digital??
When you changed the fuel pump did you change the complete assembly or just the fuel pump itself?
|
ok thank you for the info on the knock sensor. i'll check cyl, 6 and see if might be spark plug or wire. as for testing on another vehicle ...no i have not. i may go to my buddies and try it on his tommorow. as for the fuel gauge i only replaced the pump. all wires are hooked up as they were when i took the old one out, i followed the manufactures instructions and disconected the neg before attemping to take it out. replaced neg when i was finished. and still no go...? I have a digital cluster. i am now ok on these checks, for the scanner oh,m,f,cc. they all check and stay solid, the blinking ones are c,o and e they stay blinking and wont go past these ones for scan.