|
Re: Front end Vibration
Replacing the CV axles might be the next best move. The job is doable - but the hard parts are getting the hub nuts off and retorqued when you are done, and getting the driver's side axle popped out of the transmission. I do it be dropping that front-to-rear trans support crossmember. Getting that off may be tough, if the two frontmost bolts holding it up are rusted into the captive nut inside the sheet metal crossmember that runs across under the radiator.
All in all, if someone will do both of them for $90, you may be well advised to let them -try- doing it.
Good Luck.
|