[merc81]

Not to be rude, but why did you replace all that stuff? If you are just willing to spend $$$ and buy new sensors, then don't overlook the O2 sensors and the MAP sensor.

Seriously, for the most part, the PCM will till you by setting a code what sensor is giving it problems. If you don't have an obd2 reader, your local auto parts store will read the code for you.

That said, the most likely reasons for a stall AFTER starting (car starts, then either stalls at once or in a few seconds) would be a vacuum leak or MAP sensor problem. There are lots of things that COULD be bad, but just replacing stuff isn't a good plan. In particular, the crank position sensor and the cam sensor require other stuff be removed just to access them--you don't want to do that unless required. Both sensors will put up a code and light the SES light when failing.

Why don't you explain what you have noticed with the problem and why you thought those sensors should be replaced? Maybe there's some information that would point to a particular problem.