Quote:
Originally Posted by alfaguila63
My problems start having a rough idle, the scanner told me I had misfire on #1 cylinder and I check it. The wire was bad an I replace it. Still having the problem. Then the scanner says the oxygen sensor is bad. I replace it and still having rough idle but improve some. I change the gas filter and same. I change the gas pump and nothing change. I change the camshaft position sensor an nothing. Now some times when I start it for the first time on the day it start but shut of. What I do is hold the acelerator when start it for several minutes and then release it and the engine stay on. some times the engine stall when I decrease the speed like in turns and lights. I appreciate all the help you can give me on this.
|
Wow, wish I woudl get a sensor, a cel, or a nything like that.
If you check by searching by using the search button at the upper left, search for leckemby. It will give two sites, one of which has the answer for ford windstars, it is not the oxygen sensor. It reads that due to lean fuel, I think.
Good luck, and despite what people here have stated, you can even pour mineral spirits onto the egr sensor, it will not do anything at all. They are flammable, will not do anything when you do that.