I read your post on Automotive Forums regarding the eprom removal.
I have a Delco p/n 10315119 w/o tape w/ CD from 2001 MC. I opened the metal "bottom" to acces the 9355093 eprom. I do not see that number on any chip on the main board (6"x9"). There are three eproms on edge w/ heat sink plate. Numbers and size(.25"x.36") do not match. Re-reading your post and nuku's post, is the eprom 9355093 behind the face panel. I removed the face, prying the eight plastic locks loose. There is a board 3"x9" behind the face place held in place by very small screws. That is the only other board I see; also it reflects on the "hr.mn buttons" terminology.
There is a very small (approx .25"x.36") "eprom" on the 6x9 board however it does not notate 9355093.
(Anyone) Please clarify
FYI. I sent a 10335223 to a repair center just before reading the posts. They told me they would replace the eprom with a new one and burn it to fit any GM car. Cost: $50 plus $12 postage. Their refernce to eprom was what led me to search "eprom GM RDS" and find this post. Maybe $62 is cheap for an electronic lesson
Quote:
Originally Posted by Starflare5
Hey guys,
I know this an old thread, but, ....snip.
|