Quote:
Originally Posted by not_scared05
ok just did a compression test cyl.1=180 cyl.2=135 cyl.3=175 cyl.4=174 and cyl. 2 held its compression so other tham it being a burn valve and needing to be replaced ( just rebuilding the whole top end) what other things should i check for. lookin for a cheaper and less time consuming fix if at all possible.but its still just throwing out the PO302 code only
|
I would do another compression test on # 2 this time squirt some oil into the clyinder, if the compression increases the rings a leaking if not you know that it is in the valves or head area.