Quote:
Originally Posted by patriot777
After I swap the distributor I see the guy set the timing again. Is that necessary? Do you know any good videos on how to set the timing? I don't know if I will be able to do that....looks kinda hard.
|
What I would do is mark where the rotor is pointing to like he shows in the video. Plus I would take a straigt edge and put it against the distributor shaft and over the center of the coil tower in the distributor and mark on the engine with a line so you can match the base of the distributor to the exact location again. Maybe put the mark on the radiator hose closest to the distributor with a chalk marker or white out and you should be very close if not right on with the timing. You can always have someone else check the timing once you have it all back together and running again. 15*BTC is the timing on these engines.
Any more questions do not be afraid to ask as we will help any way we can. You can do it, not that hard.