Thread: Ignition timing jump when checking timing with light.
View Single Post
  #24  
Old 11-17-2011, 06:35 AM
MT-2500's Avatar
MT-2500 MT-2500 is offline
AF - Advisor
  
Join Date: Sep 2005
Posts: 16,690
Thanks: 5
Thanked 122 Times in 121 Posts
Re: Ignition timing jump when checking timing with light.
Quote:
Originally Posted by Wags391 View Post
So I checked and tested the distributor in every which way I could find. The dist is a reman from NAPA. I also tested the ignition coil. Couldn't find a problem. Everything tested to spec. The cap and rotor were installed with the engine. Couldn't say if they are ACDelco or not. The engine was installed a couple months ago by a shop in SC.
I would go for another dist from a different brand or batch and use a AC delco cap and rotor.

If no problem found with another dist go for a PCM swap.
__________________
Remember proper testing gives us the answer to many problems.
MT
Reply With Quote