View Single Post
Old 08-22-2011, 07:19 AM   #5
Tinkerin_wit_tools
AF Newbie
Thread starter
 
Join Date: Oct 2008
Location: Rossville, Georgia
Posts: 97
Thanks: 1
Thanked 0 Times in 0 Posts
Re: New Compressor cycling question

Quote:
Originally Posted by gmtech1 View Post
Check you're low side pressure and make sure the cycling switch is not stuck. It should cycle off somewhere around 20-25psi. If it's not pulling that low and the dryer isn't freezing over, drive it.
Pressure on the gauges read what they should read. As for the switch, well, just to be safe, I not only replaced that switch, but the one on the dryer as well. Only had the car running at Max A/C for about 15 minutes and didn't drive it. I will have to check it out again this next coming weekend when my wife hands back control of the car after her work week for me drive. Thanks for the input, so if you don't hear back, then all is well.
Tinkerin_wit_tools is offline   Reply With Quote