Hey guys,
I just acquired a 1991 Chevrolet S-10 Blazer with a 4.3L V6. I Picked it up at an impound lot auction so I really have no clue as to what the history is of this car or what any of the symptoms were before this car stopped starting.
Here are the current symptoms:
-Engine cranks but wont fire
-If starter fluid is sprayed in the TBI then the engine will fire.
Here is what I have deduced from my own troubleshooting and what repairs I have made so far:
-Fuel pressure into the TBI is at about 10psi which seems normal according to the manual
- I replaced the fuel pressure regulator spring and diaphragm (the spring was broken into 3 pieces)
- When I put the TBI back together, the injectors squirted fuel ONCE and then quit.
-I then took it back apart, fiddled with it and put it back together, again when I cranked it, the injector squirted ONCE and then stopped.
My next idea was to try replacing the filter on the end of the injector, or have the computer looked at. otherwise I am at a loss. Someone told me that I should look at the EGR valve and make sure there is nothing plugging that up.
Thank you for taking time to help!! I hope I have given sufficient information in order for you to have some Ideas of where I can go from here. I am happy to answer any questions which may help you understand the trouble I am experiencing.
Currently feeling like Him --->
