Greetings,
I have a power steering fluid leak. I believe (it appears to be) it is coming from what is described in the manual as the "power steering cooling pipe". It looks like it is right up front just behind the radiator on the cross member, and perhaps may have rusted through. All of the pipe is intact except one small corroded area.
I looked at the procedure in the manual to replace this and it looks rather complicated.
I figured I would just cut the leaky section out, and replace it with double hose clamps and a piece of fuel line.
My main question is: Is this in the return circuit (low pressure) or the supply circuit...High pressure.
Thoughts, commnents, suggestions?
Thanks.
P....../NH