I replaced my '94 TS intake plenum and upper and lower intake gaskets last year, and as part of the procedure I replaced the badly-degraded rubber gaskets that go at both ends of the manifold (at both ends of the "V", one under the throttle body, one under the PCV valve or so).
A little more than one month ago I realized the oil puddle underneath the car contained -besides power steering fluid from a known leak- motor oil. When I investigated the origin of the leak, I discovered the <> rubber gaskets have disintegrated AGAIN.
I don't see how this gaskets could be installed incorrectly, so I have to conclude the gaskets that came with the kit I used (Felpro?) did not withstand the oil as they should. Either way, I need to replace those <> pieces of rubber again
Now: since I don't want to be doing the same thing every 5 k miles, can someone recommend a good brand for these gaskets? Is there a material (neoprene?) that would last longer in contact with the oil?
TIA!