|
Re: the BEST U JOINTS for S - 10
Incorrect pinion angle, cheap quality joints, or improper joint installation can all cause premature joint wear. The most common cause for incorrect pinion angle is as jcAT mentioned, front and or rear chassis ride height is out of specification. Several things could cause it to be incorrect: 1) Someone messed with the torsion bars that didn't know what they were doing. 2) Body or chassis lift improperly installed on the vehicle. 3) Torsion bars and or rear springs are sagged out and need replacement. If pinion angle is out of spec, there isn't a joint made by any manufacturer that will last.
__________________
You have to know how it works,
to figure out why it doesn't.
|