|
Re: 91.3.1 'warm' starting issue
yea rock them back and forth while applying upward pressure. Mine where stuck in there pretty good.
**CAUTION** Make sure the are around the injectors is good and clean!
As soon as you pull the injectors out all the crud built up around them falls right into the cyl!
After removing the injectors and fuel rails place paper towels in the intake runners and in the injector ports so nothing accidently falls in....
__________________
90 Lumina euro 3.1 - New fuel pump/filter, new ecm, new egr valve, new upper/lower intake gaskets, new alternator, new O2 sensor, and it keeps going....
|