Quote:
Originally Posted by GTP Dad
Welcome to AF!!
Code 43 is a knock sensor error. It could mean that the plug to the knock sensor is not making contact or the sensor may be bad. The sensors are not expensive to purchase nor are they hard to replace. My manual is in storage but look on the back of the block next to the firewall. It will be round with what appears to be a large nut and a button on the end. There should be a connector attached to the end. You can change this yourself but I would suspect you have a connector not a sensor issue so it may cost nothing to replace.
|
Thanks for the reply the connector was fine, but the sensor needed changing, it's all good now.