View Single Post
Old 04-27-2011, 06:21 PM   #1
jojo32
AF Newbie
 
Join Date: Apr 2011
Location: Selden, New York
Posts: 5
Thanks: 1
Thanked 0 Times in 0 Posts
4T60E Tranny troubleshooting.

hello, im new here in desperate need of help!95 grand am 3.1 with 4t60e tranny has 126000 miles. tranny shifts fine sometimes then other times wile im accelerating it slips, rpm's fly up and it takes 10 sec with foot off of gas for it to catch( almost like its in neutral). Problems getting worse with time. Only 2 codes ignition switch( Which i replaced so i think the code is old) and vss which i replaced yesterday, vss made no difference and mph gauge is still jumping around reading crazy. fluids are good. I think there is a vacuum leak somewhere i could hear it. When I first put it on the road 2 months ago problem wasn't as bad as now. At 60 mph it would vibrate violently. I unplugged the main plug on top of tranny and vibration stopped, I drove it for a day like that until I learned it was not shifting at all then I replugged and vibration is mysteriously gone but still have a very bad slipping problem. I think the car starts in 2nd gear. Any advice would be great, thanks... Does anyone have a diagram of the vacuum lines threw out the car?? Is there a way I could disable the tcc silonoid to check for that??
jojo32 is offline   Reply With Quote