Thread: Driveline whine
View Single Post
Old 04-15-2011, 04:42 PM   #1
Blue)(Fusion
AF Enthusiast
 
Blue)(Fusion's Avatar
 
Join Date: Jan 2008
Location: North Royalton, Ohio
Posts: 703
Thanks: 0
Thanked 13 Times in 13 Posts
Send a message via AIM to Blue)(Fusion Send a message via Yahoo to Blue)(Fusion
Driveline whine

Just today my car developed an annoying whine in the driveline. It varies with wheel speed, not RPMs. I can hear it anywhere above 5MPH or so.

It is not tread noise and tires are inflated to their normal pressure.

It's loud enough that my friend who rides in the car with me occasionally noticed it right away.

It sounds like it is coming from the middle or rear of the car. Someone suggested U-joints.

I replaced both U-joints in November along with a CVPI driveshaft and extended tailshaft housing.

I'm worried it may be related to the differential or axle bearings. The gears and carrier were replaced in January by a professional Ford technician and weekend racer and all bearings looked good so we did not replace any.

Could bearings just suddenly go bad and cause this noise? How would I know if it is bearings or U-joints or anything else?
__________________

2000 Mercury Grand Marquis LS
- 119k / 14.89s @ 92.11MPH [ pictures | videos ]
> Dual Flowmaster Delta 40s / J-Mod / PI Intake Manifold & Cams / Marauder Air Box & 80mm MAF / 3.55 Trac-Lok
> Bumper Tuck / Steeda UD Pulleys / CVPI Zip Tube / Ported & Polished Plenum / BBK 70mm TB
> BOC 93 Octane Tune / Headlight Relay Upgrade / 17mm rear stabilizer bar / Heinous Aluminum Billet Rear Control Arms
> CVPI aluminum driveshaft

Blue)(Fusion is offline   Reply With Quote