[Macio4ever]

I gave up with the 1K and went back to 2K. I think (hope) successfully this time. Pictures about 2 hours after clear coating.

I started with 1 dry coat followed with 1 wet after 10 minutes. I used heavy thinned Dupont Duxone.

After about 3 hours I sprayed 1 quick dry coat and after a minute 1 heavy wet coat with 2K thinned about 10%

Finally mist few coats of pure thinner after about 40 minutes. It softens surface allows levelling and release trapped fumes of thinner which cause little pin holes.