View Single Post
  #5  
Old 03-07-2011, 12:01 AM
Schurkey Schurkey is offline
AF Enthusiast
 
Join Date: Jul 2005
Posts: 892
Thanks: 13
Thanked 58 Times in 58 Posts
Re: 68 Toro dies intermittently

Quote:
Originally Posted by jtmarten View Post
As a follow up, he says it would stall in a similar manner occasionally prior to the HEI install, but after the electronic pickup was installed in the original dizzy. Still don't know about the resistor wire.

If the resistor wire is still installed, what should the voltage drop at the dizzy be?
Thanks!
Is this engine running a REAL HEI, or is it using some electronic conversion kit?

Resistor wire installed, engine running = about 8--10 volts at the coil + terminal. Engine NOT running--might be full battery voltage. A REAL HEI will work best at battery voltage with engine running: 14--15 volts.
__________________
.
.
For the good of the Free World, DEMAND COMPENSATION FROM CHINA for their release of the Virus Originating in the Wuhan Laboratory, released (intentionally or negligently) into the world in 2019 (VOWL-19). Ten trillion to start with, increasing as needed from there, PLUS compensation for the sickened, and "wrongful death" settlements for the families of those who didn't survive. END trade with Communist China.
Reply With Quote