[popdue73]

Thanks for the info
Question: The book says to take the Crank Pully off its counter-clockwise on the bolt. To brace the engine from turning you can stick something like a big flat head screwdriver into the FlyWheel to jam the engine from moving. Where is the slot to do this or do I need to take off a cover to expose the flywheel? I tried with a small screw driver through a hole in the crankpully and it bent the screw driver. Should I try that again with an inpact gun and a steonger thicker screw driver? It appears to be really tight (17mm) or find the flywheel spot but where is it located? Do they sell a special crank pully puller tool?