Quote:
Originally Posted by medic733
I'm trying to figure out if it's possible/easy to remove the hard top from a friend's 2000 Amigo. I found the bolts that obviously need to be removed from the interior side of the top, but am wondering what else is connected. Any advice and instruction would be appreciated!
|
You probably figured this out already but here it is.
There's a total of 10 bolts holding it down. Pull all the cladding off on the inside back half to make life easier. On each side - 2 up front on the metal flat bars to the roof, 1 midway of the window next to the roll bar, and 2 on the corners on the outside behind the removable corner piece.
On the left side, inside behind the panel should be a 4 wire connector for the brake light, on the right side is a small hose hook up for the washer.