Thread: Engine year??
View Single Post
Old 12-10-2002, 02:41 PM   #4
Fishcat37
AF Enthusiast
 
Fishcat37's Avatar
 
Join Date: Dec 2001
Posts: 536
Thanks: 0
Thanked 0 Times in 0 Posts
Send a message via AIM to Fishcat37
Quote:
Originally posted by NIMO
Take the heat shield of the exhaust, it should have a year stamped on the head, also they made a 5 million series 1st Gen out of the Integra with 170 HP, the 1 million series are CRX 160HP.
I agree with you about the year being stamped on the head, behind the exhaust manifold shield........however, you are incorrect about the rest that you said.
1 Million series JDM B16A (first gen) motors come from the 89-91 Integra XSi & RSi

5 Million series JDM B16A (first gen) motors come from the 90-91 CR-X SiR and Civic SiR (EF8 & EF9, respectively)

there was never a JDM B16A with 170hp until 92, when the SiRII motor came out.
Trust me, my first B16 was a 5 million series, and my current one is a 1 million series. I purchased the longblock from hondamotorsonline, and a flex plate was mounted on the block where the flywheel normally is. This told me that it came off of an automatic Integra XSi or RSi. The 90-91 SiR (Civic or CR-X) was never available in automatic, it was only available in 5 speed. If you still don't believe me, PM Setanta or Moppie and ask them to read you the first number off of their serial number. I guarantee that both of them will start with a 5 because both of them own a 90-91 Civic SiR. thanx for reading
__________________
FLINT BLACK 1990 CRX SI
Appearance Mods:
-JDM EF8 CR-X SiR Spoiler
-94/95 Integra GS-R rims
Performance Mods:
-JDM B18C swap
-OBD1 conversion
-Chipped P28 ECU
-Skunk2 Intake Manifold
-DC Sports 4-2-1 Header
-MSD SCI-L ignition
-EXEDY Racing Clutch
Interior Mod
-'95 Integra GS-R Gauge Cluster
Former Motors - RIP:
-JDM B16A #1- Blew up due to over-revving
-JDM B16A #2 - Hydrolocked
Former Cars
'89 CRX Si - "The Bumblebee"
'94 Integra GS-R
'96 Camaro
Fishcat37 is offline   Reply With Quote