|
Re: 2000 town car ABS and check trac
Hi Steve,
the continuity test is an option in digital multimeters, it can be also known as the "beeping" function. Actually is the same thing as measuring resistance between two points, if the value is 0 or the closest possible to 0 then the multimeter will beep.
So... you can either use the continuity function or just measure resistance between each pin and ground (PIN 8) and the value should be the closest to 0 as possible.
Best regards,
Oscar.
__________________
1995 Lincoln Town Car 4.6 Signature
1997 Pontiac Grand Prix GT 3.8
2000 Ford Windstar SE 3.8
|