Quote:
Originally Posted by AJsOffroad
The fluid level is way high. Thats cold hasn't ran in a day. I pulled the top trans line off that goes into the radiator and started the engine. Put it in every gear range selection, no fluid comes out of the line. The converter is still bolted to the flywheel. So I am thinking the pump went bad.
Oh and warranty was suppose to be 2 years or 24,000 miles. I guess if I ever get a hold of the company than I could ask them what I need to do.
|
Is fluid black or burnt?
Did you speed up engine for fluid flow test?
If converter turning with engine running and you speeded up engine some and .
No fluid out cooler lines points to transmission not pumping pressure.
I would remove transmission pan and look there.
See if any metal or clutch suff or black or parts are in bottom of pan.
Check filter and pick up on filter and valve body shifting linkage.
If 2 year warranty better catch up with that company.
They may have some test they want you to do before pulling transmission.
Let us know how it goes.
Good Luck