|
Re: blower motor resistor, blower or both?
If you have rain coming in and landing on the passenger side front floor area, you probably need to lift the black cover that is underneath your wipers on the passenger side and look down inside. This black cover is held down with what look like phillips head screws, but are actually push pin anchors. You can pry them loose with a small screwdriver and pull them out. You should not have to remove your wiper blades. There is a deflector that is suppose to carry water away that has probably come loose under there and now provides a path for water to land on your blower. Get some clear silicone sealant and remove the loose baffle, clean out the groved edge and apply a bead of the silicone in it, then stick it back in place and put the cover back on.
DIC = Driver Information Center? The red LED area.
|