Quote:
Originally Posted by cajcompany
I have a 1995 Buick Century that overheated and blew a head gasket. The vehicle ran and I pulled the heads and had them resurfaced. When I installed the heads and tried to start it it did not run. It has gas and spark. I checked the compression on the front 3 cylinders. They have 0 compression. I pulled the valve covers and checked the pushrods on the rocker arms. The push rods are in the proper location. I checked the compression on the back 3 cylinders and 1 and 3 have 120 PSI and # 5 has 0. I am thinking the timing chain and sprockets have jumped a tooth or 2. Any ideas.
|
did you tighten the bolts in the pattern there supose to be when replacing?