Quote:
Originally Posted by danielsatur
Being in Michigan in the cold, running on High Heat is probably ok, just keep an eye on the temp guage.
The most probable cause is a bad electric fan, fuse, or relay.
You can trick the sensor, but if the fan don't work we wasted time.
Need to test your electric fan 1st!
|
Both fans work, when hot-wired to +12V volt.
Plug is between the two fans, attached to the fan shroud, colors are black, blue, white, grey. black/blue control the pax fan, white/grey control the driver fan. each left/right pair of wires drives the respective fan.
Unless there's a way to default a switch/sensor/relay to always-on, planning on wiring the fog-lights to the fans, as the foglights have no lenses or bulbs
(ugly, yet effective).
Anyone?
Thanks!