Quote:
Originally Posted by Tony
Not off the top of my head. I just jacked one from another distributor I had laying around and checked to see if that worked. I think I ended up replacing the whole distributor due to the bearings giving out in it.
Pull the rotor back off and remove the plastic covering under it(assuming it has one) check down inside there and see if there are any metal shavings. Code 8 is for the TDC sensor which is located down there, if there are metal shavings in it, it will throw that sensor off. The shavings are a result of the bearings wearing out. Code 20 is the Electronic Load Detector....no clue on that one honestly.
A new distributor isn't that bad on ebay, you will get a new coil and igniter with it, and new bearings.
Not sure which engine you have:
1.5 Liter
1.6 Liter |
yeah i think i am gonna just bite the bullet and buy the distributor. i found one for 105 bucks so i hope that will fix it. thanks for the help. i appreciate it.