Quote:
Originally Posted by nvious62
I have 94 k1500 that I rebuilt the motor. I pulled the frontpump seal and scared up the casing where the seal goes. I was wondering can I take tue front casing off a tran that come out of a 93 suburban? My trans has a m30 stamped on the side and I think they said the one out the sub is a 4l80e any help is appreciated.
|
You're talking about swapping the front pump assys. Yes, you can swap a 93 with a 94, they are the same transmission. The transmission is a 4L60E.
Now, when you go to pull this pump, YOU MUST remove the pan and remove the filter first AND the TCC lockup solenoid. The reason why is that both the filter and lockup solenoid mount directly up into the pump assy. If both of these are not removed, you will never get that pump to come out. Also, USE A PUMP PULLER. DO NOT pry on the pump and case or you will do more damage and the pump will leak.
transman