Quote:
Originally Posted by nette_282
I have made 2 attempts at replacing both sides, and in both attempts, could not get the hub to break free from the plate. What tool or method is used to remove hub? My service manual just says "Remove It" no note for any type of puller. Auto zone guys all saying it should just pop out, but I have beat and banged and pulled evan put the tire back on and beat on it with nothing breaking free. Yes, removed all 3 bolts, spindle nut, and on the second attempt, evan put a jack under the suspension and had the shaft loose.
|
you have an axle nut, 3 bolts thru the inside, and your abs sensor.
Usually a couple wacks with a mallet will loosen it