View Single Post
  #2  
Old 12-13-2010, 08:22 PM
j cAT j cAT is offline
AF Fanatic
 
Join Date: Oct 2007
Posts: 10,898
Thanks: 8
Thanked 432 Times in 431 Posts
Re: 2000 5.3L; High engine temp, no heat

Quote:
Originally Posted by Snipew4 View Post
Drained the coolant from the radiator, (5.3L V-8, 118K) and refilled. This engine has a surge tank & cap and does not have a cap directly on the radiator. I then started the engine, with the heater on, and let it warm up and all seemed OK. Ran it on the road and the temperature gauge went up to high, no hot air at all out of the heater. Coolant level is at the full cold level. Thinking that I either have an air bound system or for some reason, draining & refilling may have caused the thermostat to stick. No prior problems. I am thinking of starting over, just drain again and refill while the engine is running this time. Any other thoughts?
the pressure cap is to be removed. then with the dexcool added to the full hot mark start the cold engine.

continue to add coolant and rev engine to 2,ooorpm every so often to get the air out . when the engine is at the 190 deg f mark put the coolant pressure cap on ..

this is how to get the air out.
Reply With Quote