[stump]

Holy crap......embarrassment +++
How long since you guys got an update......? Hmmmm....Here we go then.

First up, the "stock" version.
Basic fuel and brake lines run. Done. Started at the rear.....


Including a new fuel filter I made up...the kit part looked to awkward or weird....??


I made some brackets and linkages for the firewall, they will connect to the throttle linkage eventually....


Added some extra hoses to the motor. Just the heater hoses....Had to re-route my thoughts with these, as my reference showed mixed methods of running them.
I think they will be ok as is.....


And finally, an overall look at the bottom. Motor in place, along with the single exhaust system.


Then, an update on the modified 240.......
After several agonising attempts at plug leads, I had success....
And many.....many hours of testing, cutting, re-testing........I had the carbs ALL linked up..










Work is still (kinda) progressing, all be it slowly......
I've started to modify the guards to fit the over-fenders a little higher than stock.
This will enable the car to sit a bit lower too....which is what I was hoping to achieve....
I'll update as soon as possible guys, and truely apologise for the delay....

cheers
Greg