Quote:
Originally Posted by tblake
Anyone have any experience?
You can get 2 front hubs for a 97 k1500 4x4 for less than the price of 1 hub at oreilley's. The ebay ones even come with a 1-yr warrenty same as oreilleys.
Just wonder if there is a reason they are so cheap.
The pickup is pulsing the ABS at low speeds and it needs to be fixed before the next major snow fall or I wont hear the end of it. I was catching hell today for draggin my feet on getting this pickup ABS fixed because of the damn snow we just got.
I found the TSB about removing and cleaning the sensors. Did both, no change.
Thanks for any input.
|
not sure with your model , but most on these gm 1990's vehicles do remove the abs fuse..this will prevent the abs from coming on ..you therefore will be able to stop..
rotating the hubs measure the voltage coming out..not sure exactly with your set up.... my 2000 siL is .4volts or more ac with the hub rotated by hand fairly fast..
if the bearing is failing this can lower the output to cause this ..
because you have no issues at higher speeds above 5 MPH it would go to the hub / rust pushing the sensor farther away from the gear teeth..