[scotts96gt]

Well guys after digging into my steering column and under dash wiring i have discovered a couple interesting things... The shop that installed my Viper remote start did a very shoddy job at bypassing the security system. The series of resistors to simulate the key were just twisted together a couple turns and not soldered. The Wires from the ignition switch were cut completely therefore the entire lock was bypassed with the resistors. Which leads me to my problem....The car will start both with the key and remote start with no resistor pack installed. Of all the problems to have, not having one! So the only thing that seems to be the weak link now is the BCM. Any ideas about reflashing the BCM and if anyone knows who can do it in the Oakland county Michigan area? The reason im thinking the problem is here is because we have been having problems with the security system ever since i had to jump start my 92 century several times last year which itself had electrical issues and may have caused a spike to my 99