|
i have a 90 hatch with a b16. first off. up the suspension as much as possible. i used parts from an integra, since they are based on the same platform. use the rear discs from an integra or a crx, but be warned that the CRX ebrake cables are too short, you must use ones from an integra. another thing that helps a lot is using the energy suspension master bushing set. it helps a lot with the suspension slop, and also raises the sag a little more. make sure you use a lot of sway bars, strut bars, and tie bars, cause you are gonna cause a lot of stress to the body. hope this helps
__________________
over 10 grand in parts, and about 300 hours of labor, and i only spent 3k. and then Katrina filled it with mud.
|