I have a 1983 380 SL that I am trying to remove front cover. I have separated from block by a bout a 1/4 inch then it is hitting something. Alldata says
NOTE: Cut a strip of sheet metal (approximately 70 x 80 mm), bend it slightly and place it between the
oil pump chain and crankshaft sprocket to prevent the chain from staying engaged in the sprocket teeth.
To pull off the timing chain cover, lift up the tensioning lever of the
oil pump chain. Do not damage the
cylinder head gaskets.
However I can't get enough slack in chain to do so. Anyone have better instructions? Thanks in advance.