|
Re: New Ignition
The common mode for replacing the ignition switch is to take the steering wheel off and disconnect the multifunction switch and take it off. There is an easier way. Take the U clamp off the steering column and drop it down. Then, take the three multi-function switch connectors and disconnect them. Remove the screw that connects the multi-function switch to the steering column. Pry up the tab that secures the switch harness retainer to the bracket on either side. Pull the retainers off the brackets. Take the multi-function switch off of the steering column.
Disconnect the ignition switch electrical connector.
Remove the switch mounting screws and take the switch off.
|