View Single Post
  #6  
Old 09-30-2010, 08:13 PM
j cAT j cAT is offline
AF Fanatic
 
Join Date: Oct 2007
Posts: 10,898
Thanks: 8
Thanked 432 Times in 431 Posts
Re: Changing fluid in Rear Differential

so you have the 14 bolt locking diff . this in the glove box sticker label should indicate G80 this is the dff. code for the locking differential.

on the diff fill area should be a tag which gives you the oil required. should be 75-90 wt synthetic oil.

when replacing this fluid / gear oil remove the rear cover and clean the metal sludge out. also the cover magnet needs to be cleaned . use paint thinner mineral spirits to clean this .

use form a gasket with a thin paper gasket place on cover let dry for 45 min then install. fill to 1/2 inch below the fill hole.

make sure the venting tube to diff is not restricted.

oil should be brown in color if gray its in need of replacing/cleaning out.
Reply With Quote
The Following User Says Thank You to j cAT For This Useful Post:
rollin tank (04-21-2011)