|
Re: Dent Removal
Dents in plastic come out easier than metal...you can soften the plastic up with a hair dryer before gently pushing it back out from the back side.
Steel dents usually still have some pucker marks around it where the metal has yielded, so even if you get it popped back out it won't be as good as new. Repair shops are usually pretty good at working it back into shape if the paint hasn't cracked or scratched off.
The only dent puller I'd recommend trying is the suction cup. The other one where you glue it on and turn the screw is either useless or will pull the paint off instead and will end up leaving two additional smaller dents where the support feet were. Good luck!
__________________
Current Garage:
2009 Honda CR-V EX
2006 Mazda 3i
2004 Chevrolet Silverado 2500HD
2003 GMC Envoy XL
2000 Honda ST1100
2000 Pontiac Sunfire
Vehicle History:
2003 Pontiac Vibe AWD - 1999 Acura Integra GS - 2004 4.7L Dakota Quad Cab 4x4 - 1996 GMC Jimmy 4wd - 1995 Chevrolet C2500 - 1992 Toyota Camry LE 2.2L - 1992 Chevrolet S10 Ext. Cab 4.3L - 1995 Honda ST1100 - 1980 Yamaha XS400 - 1980 Mercury Bobcat.
|