|
Update
Update:
I removed the ignition tonight and cleaned up the contacts. I used a multimeter to see if I was getting an output from the switch. I do have an output from the switch. Same results.. the security and check enigine light stayed on when the key is in the ON position. I did the re-learn again, and I noticed this time, the security light was not on. I ran the re-learn two more times and it remained on (solid) during this process.
I checked the starter relay, it too is working correctly. I moved on to the starter solenoid to see what kind of voltage, if any, I was getting there. I had already taken the starter down, cleaned all connections, and had the starter tested. I placed the multimeter probe on the solenoid, and had someone turn the key. The car started right up. Keep in mind, I had tried to start it a bunch of times prior to this. All I did was touch the solenoid contact???
I will recheck all of my connections again tomorrow, maybe replace the battery cable too?
|