|
Re: Coils getting "fried" after washing engine
Common problem. The COPs are especially susceptible to water damaging them. The EDIS is a little less finicky, but can still cause issues.
Use dielectric grease on the COP or wire boots. Use it liberally. But really, you shouldn't use water around the COPS or ignition system anyway. Avoid it. Scrub it with a damp rag if you have to but don't spray water there.
__________________
2000 Mercury Grand Marquis LS - 119k / 14.89s @ 92.11MPH [ pictures | videos ]
> Dual Flowmaster Delta 40s / J-Mod / PI Intake Manifold & Cams / Marauder Air Box & 80mm MAF / 3.55 Trac-Lok
> Bumper Tuck / Steeda UD Pulleys / CVPI Zip Tube / Ported & Polished Plenum / BBK 70mm TB
> BOC 93 Octane Tune / Headlight Relay Upgrade / 17mm rear stabilizer bar / Heinous Aluminum Billet Rear Control Arms
> CVPI aluminum driveshaft
|