|
Re: dies at idle and to much gas when drivingn help!
Map sensor and TPS reference voltage key on feed to sensor should be .5 volts .
May sensor to computer reading should be 1.0 to 1.5 volts at idle and 4.0-4.6 wide open throttle.
TPS sensor voltage at closed throttle should be about .6 voltage and swing up with no drop outs or glitz's to 4.8 volts wide open throttle.
If you are getting 12 volts something is way wrong or you are on wrong sensor or wire.
Get a good wiring diagram and make sure you are o right sensor and wires.
Tps sensor feed wire to computer is dark blue C.
Map sensor to computer feed wire may be black/white wire.
__________________
Remember proper testing gives us the answer to many problems.
MT
|