View Single Post
  #9  
Old 06-30-2010, 10:49 AM
tomj76 tomj76 is offline
AF Enthusiast
 
Join Date: Feb 2006
Posts: 865
Thanks: 3
Thanked 64 Times in 63 Posts
Re: 2000 Windstar not accelerating

The fuel pump is supposed to run for 2-3 seconds when you first turn the key on, before you attempt to start the engine.

The fuel pressure (~40 psi) should be maintained for several minutes after the pump shuts off. If not (intially high but bleads dow quickly), there is a leak. The leak could be the check valve in the pump, an injector, or the fuel pressure regulator, or a hose leak. If it's never high to start, then the pump is bad, or there is a blockage. Logical places to look for blockage are the fuel filter and the inlet screen on the pump.

I think you should resolve the fuel pressure reading you're getting. This could be an indication to the cause of the symptoms that you see.
Reply With Quote